The reason why the fryer turns off automatically

1. There is dirt in the nozzle.

2. The burner fire cover is not matched.

3. The pipeline is damaged and the resistance is too large.

4. Gas stoves are divided into automatic electronic ignition and manual ignition gas stoves according to different structures. The correct ignition method for fully automatic electronic ignition gas stoves to turn on the stove is: open the valve in front of the stove, first press the knob inward, and then turn it to the left. Turn, until the knob is in a horizontal state, the switch is fully opened. When igniting, the switch should be turned on to the maximum, and then turn the knob slightly to the left according to the needs of the fire to adjust the size of the flame. If it does not light up, you should immediately turn off the gas stove switch and re-ignite. When turning off the fire, just turn the knob to the vertical position to the right and shut off the gas circuit.

5. The ignition method for artificial ignition gas stoves is: first ignite the fire source (such as matches, etc.), put the fire source on the burner, and then slowly turn on the switch of the gas stove. If it is not lit, the stove valve should be closed immediately. When re-igniting, be sure to remember "fire waiting for gas", not "gas waiting for fire". When turning off the fire, first close the front valve of the stove, and then turn off the gas stove switch after the fire is out.