The working principle of the main components of electric kettle

1: Steam automatic power-off switch: When the water in the kettle is boiled, the steam generated by the steam pipe in the kettle goes to the rubber tube at the bottom of the kettle, and the steam is sent to the steam switch through the steam guide plate, and the power spring inside the steam switch will It is deformed by heat to make the steam switch act, so as to achieve the function of automatic power off.

2: Thermostat: The thermostat used by Shengning Electric Kettle is generally a butterfly thermostat, which contains a bimetallic sheet. The nature of the bimetallic sheet is different, and the working state of the bimetallic sheet is different in different temperature states. of. Sunning premium electric kettle will be equipped with STRIX thermostat

3: Electromagnetic pump: The electromagnetic pump is similar to the electromagnetic valve, which is the switch to control the integrated electric kettle. When the electromagnetic pump is controlled to make it work, the pump in the inner tank will send out the water pipe through the electromagnetic pump, from the water pipe to the electric kettle .

4: Heater: The integrated electric kettle needs to use two heaters (insulation heater and boiling water heater), 3 needles. The split type electric kettle only needs to boil the water heater, which is integrated with the body of the kettle.